Model 7700 Continuous Suction Regulators

Model 7700 Model 7701 CLINICAL USE The 7700 Series suction Regulators are designed to be used in the Recovery Room, Operating Room, Intensive Care Unit, and patient bedside for intermediate levels of suction, as well as full line vacuum. DESCRIPTION Boehringer Laboratories’ Continuous Suction Regulator is an accurate, rugged unit which is cost effective to purchase and maintain. Our design uses half as many parts as the competition. With fewer parts, reliability increases and cost of operation decreases. The Continuous Suction Regulator’s virtually all-metal construction will withstand abuse and promptly pay for itself in maintenance cost. Model 7700 includes an integral three-way control valve as a standard feature. The control valve switches to OFF, REGULATE and LINE modes in sequence. The ease with which the unit can be shut off helps to conserve vacuum in over-loaded systems. Model 7701 is identical to the 7700 but without the control valve. The regulator can be shut off via the front adjustment knob. Large, straight-through ports ensure maximum flow on demand in the REGULATE mode, which is especially important for systems with marginal vacuum capacity. This configuration also facilitates cleaning. Our Regulators can be disassembled and reassembled for cleaning and sterilization in less than one minute. Infection Control Committees have enthusiastically welcomed our Regulators which can be sterilized by gas, steam autoclave, Cidex, or pasteurization without damage. FEATURES and SPECIFICATIONS Solid aluminum valve construction OFF, REGULATE and LINE positions on integral selector valve; fully open to line in LINE position; fully vented to atmosphere in OFF position. (7700) Three way selector valve (7700) with seal-less design for tight shut-off and precise vacuum control built into unit· Unique safety latch on selector valve, to prevent accidental application of LINE vacuum Zero adjustment on gauge Large adjustment knob for fine tuning of vacuum MODES: Off, full line, and regulated (7700) LEAK RATE IN OFF POSITION: Less than 1 cc/min REGULATION: ±10% at 200 mm. Hg from full flow with suction catheter attached to zero flow GAUGE: ANSI Class B, 270° span, 0-200 mm.Hg MATERIALS: Hard anodized aluminum, stainless steel, Lexan, Buna N rubber DIAMETER: 2 ½" LENGTH: 5" WEIGHT: 1 lb. STERILIZATION: Gas, steam autoclave, Cidex, or pasteurization WARRANTY INFORMATION WE GUARANTEE SUCTION REGULATOR PARTS AND LABOR FOR FIVE YEARS. WE WILL REPLACE FREE OF CHARGE ANY PART (EXCEPT GAUGE WHICH HAS A ONE YEAR WARRANTY) THAT FAILS ON OUR SUCTION REGULATOR FOR FIVE YEARS FROM DATE OF PURCHASE. Our adjustable-zero vacuum gauge cuts gauge service dramatically. Additionally, we incorporate a spring-mounted movement which makes the gauge more tolerant of shock.